Resi-Blast Medium 25ml Nett 14897
To avoid leaving indents and craters our resi-blast should be added to the mixed pigmented resin in your cups before pouring on to the canvas or board surface (apply 2-3 droplets per cup size quantity of resin).
Also if it is applied in a fine mist by spray bottle it creates different effects without dimples and craters!
Resi-BLAST certified non-toxic ASTM D-4236 is an innovative, single part liquid additive that is dropped into wet and coloured (pigmented) resin. The additive is commonly referred to as a dispersant, interference (or distressing) medium.
Essentially it is a single-part polymeric liquid that reacts with wet epoxy, polyester and polyurethane resins by repelling itself away, thereby stimulating movement and blooming in concentric outward circles. It is not a paint or a resin. It will not cure on its own. This dispersion reaction creates motion into self-contained cellular structures.
Droplets should be added to the pigmented resin surface immediately after mixing / pigmenting. The motion is instigated instantaneously and can be further enhanced by applying heat in that area. Do not wait for the resin to gel or partially cure as resi-BLAST will not work at all.
resi-BLAST will not react or retard the curing cycle of the resin. The additive may leave shallow uniform depressions (craters) in the resin surface which can add to its optical effect. In addition any residue of the additive will migrate to the surface of the resin and should be wiped off with a dry cloth after the resin has fully cured (see individual product datasheets for this info). This residue can also act as a polish layer to further enhance a glossy resin surface.
resi-BLAST is safe and user-friendly. It is odourless, inert, stable, non-toxic, non-flammable, non-VOC with with no aggressive chemical, solvent or alcohol ink content. MSDS available on request.
Also if it is applied in a fine mist by spray bottle it creates different effects without dimples and craters!
See resi-BLAST in action here!
Resi-BLAST certified non-toxic ASTM D-4236 is an innovative, single part liquid additive that is dropped into wet and coloured (pigmented) resin. The additive is commonly referred to as a dispersant, interference (or distressing) medium.
Essentially it is a single-part polymeric liquid that reacts with wet epoxy, polyester and polyurethane resins by repelling itself away, thereby stimulating movement and blooming in concentric outward circles. It is not a paint or a resin. It will not cure on its own. This dispersion reaction creates motion into self-contained cellular structures.
Droplets should be added to the pigmented resin surface immediately after mixing / pigmenting. The motion is instigated instantaneously and can be further enhanced by applying heat in that area. Do not wait for the resin to gel or partially cure as resi-BLAST will not work at all.
resi-BLAST will not react or retard the curing cycle of the resin. The additive may leave shallow uniform depressions (craters) in the resin surface which can add to its optical effect. In addition any residue of the additive will migrate to the surface of the resin and should be wiped off with a dry cloth after the resin has fully cured (see individual product datasheets for this info). This residue can also act as a polish layer to further enhance a glossy resin surface.
resi-BLAST is safe and user-friendly. It is odourless, inert, stable, non-toxic, non-flammable, non-VOC with with no aggressive chemical, solvent or alcohol ink content. MSDS available on request.
| Product Code | 142991 |
|---|---|
| Size | 25ml |
